Alan:
I have it as Toyota P/N 83770-30070. This is right out of the original
"Smitty' instruction book that came with my kit - long ago.
Worked for me.
Earl Kagna
Victoria, B.C.
BJ8, BT7 tri-carb
-----Original Message-----
From: Bluehealey
Sent: Tuesday, June 17, 2014 2:02 AM
To: healeys@autox.team.net
Cc: 'Steve Gerow'
Subject: Re: [Healeys] Smitty Speedo cable
Team.
Could anyone provide me with a part number for the Toyota angle connector
for the transmission? I am gathering the few remaining parts I need before
the winter returns when I plan to carry out the conversion on 'BlueHealey'.
Thanks.
_________________________________________
(______________ Alan Bromfield_______________)
(______\__1957-BN4__1959 AN5__/______)
(_____BlueHealey.com______)
-----Original Message-----
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of Steve
Gerow
Sent: 14 June 2014 14:05
To: healeys@autox.team.net
Subject: Re: [Healeys] Smitty Speedo cable
Some of my experiences with the hybrid cable:
Nisonger made mine - any speedo shop should be able to. They'll need the
exact length.
I originally made do without the Toyota angle connector on the trans, but
the cable died in a year - too much of a bend exiting the trans.
You may also need your speedo recalibrated to the gear drive in the Toyota
trans. Nisonger has a pdf on how to measure the rotations of the speedo
cable when pushing the car through 52 ft 9-1/2".
IMHO you should also make sure the Toyota trans mount centering bolt is
riding on the leading edge of the hole so the engine won't move forward
under braking.
Steve Gerow
Altadena, CA, USA
BN6
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|