Hi Price,
I think the easiest way to lock the flywheel is to jam a suitably sized
piece of steel or even a long socket between a ring gear tooth and a bolt
in one of the starter bolt holes.
Sometimes takes a bit of fiddling around to get a good lock but it does
work and you are very unlikely to damage anything.
Michael S
BN1 #174
On Tue, Jul 8, 2014 at 2:06 PM, Price Lindsay <050.rpl@gmail.com> wrote:
> I am changing my clutch assembly and having trouble getting the flywheel
> assembly off to access the Spigot/Pilot bushing which I want to replace.
> The
> flywheel turns and won't let me loosen the 4 bolts. (I don't have access to
> pneumatic tools which would probably do the trick.)
>
> Any suggestions?
>
> Price Lindsay
> 67 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|