[Healeys] steering box seal

["healeymanjim" <healeymanjim@hansencc.net>]

I have found that even if you replace the seal it will still leak because of 
the groove in the shaft from the old seal.  pop the shaft out and sand/polish 
out the groove.  is use 600 sandpaper then crocus cloth to polish it up.  I 
drain the oil and replace it with constant velocity joint grease as I learned 
in one of the rendezvous seminars.  works great here in vegas as even penrite 
will leak in this heat.
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys