healeys
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Healeys] Stripped bolt

from [Perry] [Permanent Link][Original]
To: healeys <healeys@autox.team.net>
Subject: Re: [Healeys] Stripped bolt
From: Perry <healeyguy@aol.com>
Date: Mon, 26 Oct 2015 12:36:40 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <CACPMnYqvaL1bBocqff+yk5R+kyMFLzBXhfO8_Ezc-Npd6ELoRQ@mail.gmail.com> <562DB1DF.3070506@comcast.net> <CACPMnYo_18vADuT_45Qo28P2wYwyD=aKLdCMy5ba+wGoj3=9ag@mail.gmail.com> 
If I recall correctly those short bolts only go through a very thin section of 
the block casting. Suspect that the threads on the bolt stripped leaving a 
short section of intact thread in the lifter cavity. It will take some pulling 
pressure on the bolt while unscrewing the help the remaining threads on the 
bolt to catch the threads in the block. 
Perry
Sent from my iPhone
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Healeys] Stripped bolt, Bob Spidell
Next by Date:  Re: [Healeys] Stripped bolt, Michael
Previous by Thread:  Re: [Healeys] Stripped bolt, Bob Spidell
Next by Thread:  Re: [Healeys] Stripped bolt, Michael
Indexes:  [Date] [Thread] [Top] [All Lists]