--===============6366449348609698901==
boundary="----=_Part_82301_1864000827.1470759690225"
------=_Part_82301_1864000827.1470759690225
Content-Transfer-Encoding: 7bit
I have not tried the roller bearings in the top trunion, so I cannot comment on
how effective they are in reducing the overall steering effort required as
compared to a correctly set up & lubricated original front suspension. However,
simply as a warning to anyone reading this discussion who is not completely
familiar with all the issues, I have read that they (trunion roller bearings)
may require shimming to obtain the proper clearance (vertical end float) of the
kingpin & it is my understanding that this is especially difficult because no
shims are available or machining may be required.
Gary Hodson
-----Original Message-----
From: Chris Dimmock austin.healey@gmail.com
Hi John,
Thick oil/ Penrite Steering box grease will also make the steering heavier.
So will under inflated tyres.
So will an Unlubricated top Trunion phosphor bronze thrust washer, or poorly
shimmed. I.e. Too tight.
So will a smaller steering wheel.
So will wide tyres.
So will thick oil in the steering idler box.
So will too much castor.
I have wide (6 inch) tyres, heaps of negative camber, and a small steering
wheel.
I run 32 - 34 PSI in the front tyres, 2lb less in the rears.
Yes - Penrite type steering box grease will make your steering heavier.
To get it back to "normal", I also run these.
https://www.ahspares.co.uk/austin-healey/big-healey/suspension-front/top-trunnion-bearing-kit-pair.aspx
No commercial interest.
Try Roller bearing top Trunion bearings.
Best
Chris
------=_Part_82301_1864000827.1470759690225
Content-Transfer-Encoding: 7bit
<font color='black' size='2' face='arial'>
<div>I have not tried the roller bearings in the top trunion, so I cannot
comment on how effective they are in reducing the overall steering effort
required as compared to a correctly set up & lubricated original front
suspension. However, simply as a warning to anyone reading this discussion
who is not completely familiar with all the issues, I have read that they
(trunion roller bearings) may require shimming to obtain the proper
clearance (vertical end float) of the kingpin & it is my understanding that
this is especially difficult because no shims are available or machining may be
required.</div>
<div> </div>
<div>Gary Hodson </div>
<div> </div>
<div> </div>
<div style="color: black; font-family: arial,helvetica; font-size:
10pt;">-----Original Message-----<br>
From: Chris Dimmock <a
href="mailto:austin.healey@gmail.com">austin.healey@gmail.com</a><br>
<br>
<div id="AOLMsgPart_1.2_4d5a863e-0f03-4a96-852a-aa09bcba5682">
<div class="aolReplacedBody" dir="auto">
<div>Hi John,</div>
<div>Thick oil/ Penrite Steering box grease will also make the steering
heavier. </div>
<div>So will under inflated tyres.</div>
<div>So will an Unlubricated top Trunion phosphor bronze thrust washer, or
poorly shimmed. I.e. Too tight. </div>
<div>So will a smaller steering wheel. </div>
<div>So will wide tyres. </div>
<div>So will thick oil in the steering idler box. </div>
<div>So will too much castor. </div>
<div> </div>
<div>I have wide (6 inch) tyres, heaps of negative camber, and a small steering
wheel. </div>
<div>I run 32 - 34 PSI in the front tyres, 2lb less in the rears. </div>
<div><br>
</div>
<div>Yes - Penrite type steering box grease will make your steering
heavier. </div>
<div>To get it back to "normal", I also run these. </div>
<div><a
href="https://www.ahspares.co.uk/austin-healey/big-healey/suspension-front/top-trunnion-bearing-kit-pair.aspx"
target="_blank">https://www.ahspares.co.uk/austin-healey/big-healey/suspension-front/top-trunnion-bearing-kit-pair.aspx</a></div>
<div>No commercial interest. </div>
<div><br>
</div>
<div>Try Roller bearing top Trunion bearings. </div>
<div><br>
Best</div>
<div>Chris <br>
<br>
<br>
</div>
</div>
</div>
</div>
</font>
------=_Part_82301_1864000827.1470759690225--
--===============6366449348609698901==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============6366449348609698901==--
|