If they were set up correctly with the shims and spacer, and tightened to
the correct torque before securing the castellated nut with a split pin,
there should be no need to re-torque them.
-----Original Message-----
From: Healeys <healeys-bounces@autox.team.net> On Behalf Of R. Lindsay
Sent: January 23, 2021 9:31 PM
To: Healey List <healeys@autox.team.net>
Subject: [Healeys] Front Bearings
I changed the front bearings on my BJ8 about 500 miles ago. Do I need to
re-torc the nuts at some time soon or let it go?
Price Lindsay
67 BJ8
Sent from my iPhone
_______________________________________________
$12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/m.g.sharp@sympatico.ca
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|