--===============2284476410720916334==
--00000000000044a07d05defe3d0d
Trying to install the wiper rack and motor back into the BN2. I find the
spindle nearest the wiper motor is just short of the hole in the shroud.
Not sure if it fit before the shroud was removed and put back on because
the rack and motor was given to me as a used setup for the 100 complete.
At least I think it is for a 100. Anyone tell me what a BN2 wiper motor
looks like? The distance between the two spindles is correct. When I put
the spindles in place in the two holes in the shroud the rack does not
reach the wiper motor by 1/4 to 1/2 inch. I bought a complete new rack
with spindles from the UK, but the tubing that connects to the wiper motor
is a straight piece of tubing, not curved like the original one. I have
not compared it to the original curved one for length, but I suspect it is
short also. Short of trying to make one myself, are there any vendors that
custom make the tubing in different lengths for the wiper rack?
Mike MacLean
--00000000000044a07d05defe3d0d
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr"><div>Trying to install the wiper rack and motor back into =
the BN2.=C2=A0 I find the spindle nearest the wiper motor is just short of =
the hole in the shroud.=C2=A0 Not sure if it fit before the shroud was remo=
ved and put back on because the rack and motor was given to me as a used se=
tup for the 100 complete.=C2=A0 At least I think it is for a 100.=C2=A0 Any=
one tell me what a BN2 wiper motor looks like?=C2=A0 The distance between t=
he two spindles is correct.=C2=A0 When I put the spindles in place in the t=
wo holes in the shroud the rack does not reach the wiper motor by 1/4 to 1/=
2 inch.=C2=A0 I bought a complete new rack with spindles from the UK, but t=
he tubing that connects to the wiper motor is a straight piece of tubing, n=
ot curved like the original one.=C2=A0 I have not compared it to the origin=
al curved one for length, but I suspect it is short also.=C2=A0 Short of tr=
ying to make one myself, are there any vendors that custom make the tubing =
in different lengths for the wiper rack?</div><div>Mike MacLean<br></div></=
div>
--00000000000044a07d05defe3d0d--
--===============2284476410720916334==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============2284476410720916334==--
|