Hi Don,
I have fixed such problems several times in the past.
When you set up the cam bevel gear, the coupling must not be stretched nor
pressed,
otherwise it sometimes breaks.
If you are not lucky enough, drive fork breaks.
Good luck,
Hiro
-----Original Message-----
From: owner-mg-mmm@autox.team.net [mailto:owner-mg-mmm@autox.team.net] On
Behalf Of Bill Tantau
Sent: Thursday, November 06, 2008 3:35 AM
To: Terry Sanders; mg-mmm@autox.team.net; DB35PA@aol.com
Subject: Re: unusual occurance
Hi Don!
Since we don't hear of this sort of failure very often ,if at all, I'd suspect
some sort of installation anomaly - or - material failure. A close inspection
of the bits should tell.
Bill Tantau
-----Original Message-----
>From: Terry Sanders <taterry@pacbell.net>
>Don, don't be discouraged. The factory file on my NA sez that the coupling
>broke in Banbury during its maiden voyage from the factory to the dealer in
>northern England!
>They sent a mechanic to fix it....I have his report from Jan 1935.
>Terry in Oakland
>
>--- On Wed, 11/5/08, DB35PA@aol.com <DB35PA@aol.com> wrote:
>From: DB35PA@aol.com <DB35PA@aol.com>
>Recently gave PA 1823 one of her longest runs to-date... about 80 miles.
>When I fired her up Sat AM to go to local Monthly MG Club meeting, was
greeted
>
>by a loud knock which rose and fell with RPM. BIG sinking feeling in
>stomach!
>
>Later, we determined the knock to come from the top end and found the
>flexible coupling on the vertical to have broken through one of the 4 bolt
>holes.
>
>New part on the way from S&V but curious... has anyone else ever suffered
>the same? Do I have something cranked down too hard? I have done a lot of
>work
>
>in this area from the time it swallowed the brass distributor drive gear,
>rebuilding dynamo after cutout stuck...and addressing oil leak down the cam
>drive.
>
>Thoughts about coupling failure? Just fatigue after 74 years?
>Thanks
>Don B.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
|