To the list,
I forgot - I have an early engine, number 9782, in car number
TD-22524EXL/NA, XPAG/TD2/22777. The plugs I mentioned to Charlie are 1/2"
reach Denso W20FP-U, and they run well in THAT engine. Sorry for any
confusion.
Pete
53 TD (with early engine)
----- Original Message -----
From: "Charlie Baldwin" <ewsinc@suscom.net>
To: <peter-thiel@sbcglobal.net>
Cc: "mg-t" <mg-t@autox.team.net>
Sent: Tuesday, April 18, 2006 9:37 PM
Subject: Re: spark plugs
> Peter,
> Would that be for the later 3/4" reach plug? I see that you have a '53.
> Someplace in my internet search I came across ND W20FS-U. I figured that
> was probably Nippon Denso and since yours has a similar configuration, I
> think I'm correct.
> The Pep Boys I went to had no listing earlier than a TF which I figured
> was the 3/4" reach. I don't recall what brand that was.
> We have Advance Auto here in PA, but not the others.
> Thanks,
> Charlie
>
> peter-thiel@sbcglobal.net wrote:
>
>> Hi Charlie,
>> I use Denso brand, W20FP-U, available at Advance, Krager, Parts
>> America, and probably many others here in the good ol' USA. Advance
>> actually had a listing for TDs!
>> Pete Thiel
>> '53 TD
>>
>> ----- Original Message ----- From: "Charlie Baldwin" <ewsinc@suscom.net>
>> To: "mg-t" <mg-t@autox.team.net>
>> Sent: Tuesday, April 18, 2006 6:38 PM
>> Subject: spark plugs
>>
>>
>>> What are you guys using for spark plugs these days? Mine is a 1/2"
>>> reach. I took out Champion L86C which is listed for motorcycles. Also
>>> found a listing at Rock Auto for an Autolite 4093.
>>> Any suggestions?
>>> Charlie
>>> '52 TD
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|