any one have any idea on how to tighten the lower oil bypass line (flat two
sides) banjo bolt.... i cannot get an adjustable wrench in there there's
simply no room with the oil lines and such and a socket wont fit..
also, i have an MG (TD??) intake manifold and air cleaner in which the
manifold is a cast aluminum slightly a rougher look, unlike the shinny smooth
look on my TD etc.. the black air cleaner part is the same...
lastly does anyone have a set of 1-1/2" Mark II carbs (or know what else they
were fitted to) as I have the wrong set on my car..also looking for the larger
diameter Mark II air cleaner and proper manifold.
Thanks for the input as always.
Rocky
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|