I just painted the outside of my drums with black paint. Never did burn off
in 30 years, maybe I'm just driving too slow!
John F. Quilter
Brisbane, California
1951 TD
----- Original Message -----
From: "Stuart C. Keen, Jr." <simbafish@comcast.net>
To: "MG" <mg-t@autox.team.net>
Sent: Tuesday, September 29, 2009 3:17 PM
Subject: [Mg-t] Brake Lub
>I am in the process of rebuilding the rear brakes of my MG TD. Everything
>is
> clean now. What type of lub do I use for the area where the wheel cylinder
> assembly (Moss 180-630) slides up and down? Should I use brake grease,
> silicone, oil or leave it dry. My concern is that if lubed, then it could
> attract dirt and cause problems in the future. I find nothing in the
> workshop manual pertaining to lubricating this part.
>
> Also, I find that after I clean the drums with brake cleaner, they tend to
> rust. Should I smear a light coat of oil on the areas not contacted by the
> brake shoes? How to prevent rust?
>
> Thanks for your help, one and all.
>
> Stu Keen
> 1951 MGTD Mark II
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Mg-t@autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|