mgs
[Top] [All Lists]

B Hazard Switch - Life after Death!

To: anco@ix.netcom.com
Subject: B Hazard Switch - Life after Death!
From: anco@ix.netcom.com (Thomas Anderson )
Date: Sun, 11 Jun 1995 20:39:58 -0700
Directional signal failure is often traced to the clunky hazard switch 
which is wired into the signal circuit. Contact failure in the hazard 
switch and its lights out in the directionals. Don't pay something like 
$45 for a new (clunky) hazard switch. Remove the switch assembly and 
disassemble the switch from its square plastic box by pushing the 
switch out the rear while depressing the two plastic tangs at the top 
and bottom. The contacts are now visible and a narrow piece of emery 
paper can be slipped in via a convienient slot (Lucas forethought?) 
between the contacts. Snap the switch closed and pull out the emery 
cloth nicely cleaning the pesky contacts.

Tom Anderson BSME
Menlo Park CA
76B under rescue

<Prev in Thread] Current Thread [Next in Thread>
  • B Hazard Switch - Life after Death!, Thomas Anderson <=