mgs
[Top] [All Lists]

Kriss Bickel wites RE: Top Hardware -Reply

To: mgs@Autox.Team.Net
Subject: Kriss Bickel wites RE: Top Hardware -Reply
From: Kenneth Scott <KSCOTT@holycross.edu>
Date: Wed, 26 Feb 1997 08:38:39 -0500
I took a similar approach but, instead of messing with nuts on a plate etc.
I used a 3/8" thick triangle and put tapped holes in the appropriate
locations.  I used a small machine screw to hold the plate in place (drilled
a corresponding hole in the top mounting plate to clear the head) and it
worked like a charm.
Ken Scott
77 MGB 

<Prev in Thread] Current Thread [Next in Thread>