mgs
[Top] [All Lists]

Re: MGA Starter/Transmission Cover

To: Richard Gludt <didodido@idaho.tds.net>
Subject: Re: MGA Starter/Transmission Cover
From: tallen <tallen@csc.sctboces.org>
Date: Fri, 20 Jun 1997 21:29:32 -0400 (EDT)
I believe this was cnered several months ago on this very list.  The
unanimous answer was.... There never was any cover.

Tom '60 MGA 1600

On Fri, 20 Jun 1997, Richard Gludt wrote:

> Hi All
> I have the same three holes, also no cover. (two extra transmissions still
> no cover)
> Does anyone know what the story is? Same questions as Joe
> 
> Thanks
> 
> MGA  Under constructon
> Dick G
> Troy, Idaho
> 
> ----------
> > From: RatiganJ@aol.com
> > To: mgs@autox.team.net
> > Subject: MGA Starter/Transmission Cover
> > Date: Thursday, June 19, 1997 8:35 PM
> > 
> > Fellow listers...
> > 
> >      The end of the starter that engages with the flywheel protrudes
> through
> > the transmission on my 58 MGA.  It appears that there should be a cover
> over
> > this end of the starter that attaches to the transmission housing with
> three
> > screws/bolts.  However, I do not find this part in the Moss catalog nor
> do I
> > find it called out in any of the drawings in the MGA Shop Manual.  Could
> one
> > of the many helpful MGA owners on the list take a look and see if there
> is a
> > cover I am missing?  Does anyone have an extra cover for sale?
> > 
> >      Thanks...
> >      Joe Ratigan 
> 


<Prev in Thread] Current Thread [Next in Thread>