Re: wire wheels #%^* !!!

[Trmgafun@aol.com]

In a message dated 97-06-21 00:05:08 EDT, you write:

<< However, what you describe also sounds like your wheel may have been
tightened too much in which case the above may need to be done if plenty of
penetrating oil and heat does not free it up.
 
 Hope this helps and good luck.
 
 Dr. Doug
 >>

Maybe tightened too much and mounted dry without a coat of grease or
antisieze on the splines.

Just my $.02

Scott Helms