According to the Lucas manual 1 is red and goes to the switch,3 is
brown and goes to the switch 2 is green and goes to the supply what ever
the supply means. E is ground. I looked at mine but everything looks
black. On mine 1 and 3 are used 2 is not used at all. 0 or e is the ground
and is athin black wire. It should be noted that the Lucas manual states
that 3 is for a 2 speed motor. But mine is not a two speed motor and yet
3 is used? Hope this helps.
...Art
On Sun, 27 Jul 1997 PoleCat37@aol.com wrote:
> We are trying to install a new wiper motor and which wires go to which
> terminals is unclear from the diagrams. The terminals look something like
> this:
>
> 3
> 1 2
> -- --
>
> O (screw)
> E
>
> Which wires go on which terminals?
>
> Thanks
>
|