mgs
[Top] [All Lists]

Re: Parts List vs Standard Hardware - Reply

To: tsherman@tecinfo.com, tlcraw4d@nh.ultranet.com
Subject: Re: Parts List vs Standard Hardware - Reply
From: JustBrits@aol.com
Date: Wed, 12 Nov 1997 10:40:44 -0500 (EST)
In a message dated 97-11-12 09:56:50 EST, tsherman@tecinfo.com writes:

<< Subj:         Re: Parts List vs Standard Hardware
 Date:  97-11-12 09:56:50 EST
  Todd,
 
 Most of the nuts / bolts in MGBs are 5/16" fine thread
 of various lengths.  All the interior bits I've seen are
 self-tapping sheet metal screws, phillips (pan head, I
 think), painted black.  You'll run into a few other size
 bolts but most are 5/16".
 Good luck with the B!
 
 Tyson Sherman
 (hardware store employee, engineering student)
 76 MGB
 http://www.tecinfo.com/~tsherman
  >>
Gents:

   Also remember there are PoziDrive screws also.  Do not  interchange
screwdrivers and both the driver and the screw will be damaged.

Regards,

        Ed

<Prev in Thread] Current Thread [Next in Thread>