mgs
[Top] [All Lists]

MGA Top Holes?

To: MGS@Autox.Team.Net
Subject: MGA Top Holes?
From: MYLDN <MYLDN@aol.com>
Date: Wed, 8 Apr 1998 22:01:55 EDT
Ok here is a first, when stripping the rear cowling on my 1500 roadster I
discovered two paralel sets of holes along the fender line were the top
fastens down to the bullet snaps, On the first set, the first hole is about
3/4 of an inch from were the piping would run the second is about 11/4 inches
high the third is around two inches.  On the second set the first is about
11/2 high the second is about 2 inches high and the third is about 31/2 inches
high. does anyone have any wisdom on which to keep and which to fill, or does
either set work if so the higher set would have a better final look as the low
set would almost be on the piping.
Signed, bewildered in Oregon.
Sean Muldoon, 58 MGA Roadster. 

<Prev in Thread] Current Thread [Next in Thread>
  • MGA Top Holes?, MYLDN <=