mgs
[Top] [All Lists]

Re: Refinishing Rostyle wheels

To: danray@bluegrass.net
Subject: Re: Refinishing Rostyle wheels
From: miker15@juno.com
Date: Mon, 27 Jul 1998 06:58:42 EDT
On Sun, 26 Jul 1998 10:48:24 -0500 "Dan Ray" <danray@bluegrass.net>
writes:
>First off, don't trust the masks to do all the work for you. I didn't 
>use
>masks, (waste of money, really) just spent some time with GOOD 3M 
>masking
>tape and an exacto knife. This will ensure the paint goes where it 
>belongs.
>I used Plasti-Kote color "GM 7184" for the silver and plain old 
>Wal-Mart
>Satin black for the black.
>Clear Coating might be a good idea, although I didn't do it. I only 
>restored
>the spare, so have no experience with how it holds up on the street.
>
>Dan
>'73 B
>
Well said Dan-  the masks really dont give a very good finish -my 72 has
all five done in the manner you mention - though i cant remember what
paint i used, it was just common or garden hardware store paint.
I didnt clearcoat them and after 3 years and around 15-16000 miles they
are still fine.
/I would point out that i didnt make a note of how long it took but it
was MANY winter evenings....at a guess about 3 evenings per wheel minus
coffee breaks and the occasional TV programme!!

mike robson
69 roadster (wires, painted and clearcoated)
70 BGT (wires, powdercoated)
72 roadster (rostyles)


<Prev in Thread] Current Thread [Next in Thread>