The short filter is a FRAM PH43 and the long one is a FRAM PH8A. The
PH43 is a typical Chrysler 6 and 8 cylinder from the 60's and 70's. The
PH8A is a typical Ford from the same era. Have your parts guy cross
either number into something other than FRAM.
EAZ
Feldman, Jack (Jack) wrote:
>
> I don't have the numbers with me, but there is a larger filter that will fit
> the MG's. It is about 2 inches longer than the standard one, and therefore
> has more filtering surface. I always use them. Look up MG in the book, and
> then ask someone who knows filters the number of the bigger filter. NAPA has
> them. They can often be bought on sale. I'm trying to get to my local Track
> Auto which has filters on sale this week.
>
> Interesting trick. At the C gathering someone had a spin on adapter, and had
> painted his filter (the larger version that I mentioned above), green to
> match his perfectly painted engine.
>
> MGA filters to fit the canister type housing should be available from NAPA.
> The Healey 3000 filters are available. I had the number, went to my local
> NAPA store, and they didn't have to order it! The filter is the can with
> holes in it, and a paper element. I prefer the felt filters, but this did in
> a pinch.
>
> Jack
>
|