Electrical troubles

["Cordell, Ralph PhD" <rzc4@cdc.gov>]

I soldered all the bullet connectors on my '59 MGA.  I first stripped the
insulation off the wire for about 1/4".  Then I used a propane torch and
needle nose pliers to heat the connector and fill it with solder.  Before it
could cool I slipped the wire into the molten solder.  I removed any excess
solder with a fine mill file.

ralph cordell
'59 MGA
'84 Turbo Regal
'87 Grand National
'96 Roadmonster