mgs
[Top] [All Lists]

Re: Lead Dust

To: "Murch, Paul" <murch@y-city.net>,
Subject: Re: Lead Dust
From: Trevor Boicey <tboicey@brit.ca>
Date: Mon, 19 Oct 1998 01:15:28 -0400
"Murch, Paul" wrote:
> The process involves applying the lead and then shaping
> it with a file.  This produces large shavings and produces very minimal
> amounts of dust. 

  You have to sand it eventually. A file does not produce
a surface smooth enough to take paint.

  Unless you are planning on using 1/8th inch of 2K
primer (ie: $400 worth) you are not going to make a
leaded area ready for topcoat without sanding.

-- 
Trevor Boicey, P. Eng.
Ottawa, Canada, tboicey@brit.ca
ICQ #17432933 http://www.brit.ca/~tboicey/

<Prev in Thread] Current Thread [Next in Thread>