mgs
[Top] [All Lists]

Re: jacking points...

To: "John Steczkowski" <stecz@Crossroads.com>,
Subject: Re: jacking points...
From: "Paul Hunt" <paul.hunt1@virgin.net>
Date: Tue, 16 Mar 1999 19:59:03 -0000
I have replaced my rear springs a couple of times and used axle stands
immediately forward of the rear spring front mountings as Skye says.

PaulH.
http://freespace.virgin.net/paul.hunt1/

-----Original Message-----
From: John Steczkowski <stecz@Crossroads.com>
To: MG Mailing List (E-mail) <mgs@autox.team.net>
Date: 16 March 1999 17:43
Subject: jacking points...


>I need to jack up the back of my '75 Tourer to replace the rear springs and
>bushings. Where is a good place to put jackstands? I need to leave the leaf
>springs and axle free to move things around/replace the springs.  Are the
>jacking points ok to use, or will I crush them?
>
>the front jack stands, I'm going to use the crossmember.  I would like to
>put the whole thing on jackstands, but I'm afraid that the jacking points
>are to close to the balance point of the car.
>
>----
>John Steczkowski
>Director of Software Engineering
>Crossroads Systems, Inc.
>512-794-2742
>
>
>


<Prev in Thread] Current Thread [Next in Thread>