| To: | REwald9535@aol.com, mgs@autox.team.net |
|---|---|
| Subject: | Re: pulling out the spacers in the front hubs |
| From: | Mgbbob@aol.com |
| Date: | Fri, 2 Apr 1999 06:52:27 EST |
I STRONLY agree Rick; My experience with tapered roller bearings tells me that they MUST be preloaded to a value (approx. 11-15 in lb) to drive out the clearances. These bearings WILL NOT carry a load otherwise. Tapered rollers are quite unlike radial bearings that need some end float. Bob Stahlbush 66 MGB GHN3L 78708 60 TR3A TS 81398 L |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | "the MGB is an awful (GOOD) car", Eric Kutzli |
|---|---|
| Next by Date: | MGB Battery box framework, one more time, David Allen |
| Previous by Thread: | Re: pulling out the spacers in the front hubs, Paul Hunt |
| Next by Thread: | Re-tuning, Scott Regel |
| Indexes: | [Date] [Thread] [Top] [All Lists] |