Either that or the timing is retarded 6 to 10 degrees and it's running out
of steam.
Harlan.
-----Original Message-----
From: REwald9535@aol.com <REwald9535@aol.com>
To: Mikecquinn@aol.com <Mikecquinn@aol.com>; mgs@autox.team.net
<mgs@autox.team.net>
Date: Wednesday, April 21, 1999 6:18 PM
Subject: Re: under power (Normal or not?)
>In a message dated 4/21/99 3:09:16 PM SA Eastern Standard Time,
>Mikecquinn@aol.com writes:
>
>> It seems to really top out on the power
>> curve at about 3500 rpms.
>
>3500 is about where a Weber goes from the idle circuit to the main circuit.
>I would suspect either a miss sized or plugged main jet(s) or a problem
with
>the emulsion tubes or the air corector jets.
>
>Hope this helps
>Rick
>
|