mgs
[Top] [All Lists]

Re: Air Fuel Gauge

To: "Michael Graziano" <mgrazian@ltcm.com>,
Subject: Re: Air Fuel Gauge
From: "Paul Hunt" <paul.hunt1@virgin.net>
Date: Fri, 21 May 1999 19:55:30 +0100
K&N have a similar system available on
http://www.knfilters.co.uk/kn_hi/monitor.htm

PaulH.
http://freespace.virgin.net/paul.hunt1/

-----Original Message-----
From: Michael Graziano <mgrazian@ltcm.com>
To: Spridgets (E-mail) <spridgets@autox.team.net>; MGList (E-mail)
<mgs@autox.team.net>; 'Spitfires' <spitfires@autox.team.net>
Date: 17 May 1999 14:52
Subject: FW: Air Fuel Gauge


>This is the response I received from Force EFI regarding their digital
>mixture gauge.  While I won't be purchasing within the next month,  I'd
like
>to get this.  THe engine must really RUN betore I retune the carb.  If
>anyone is interested in these,  maybe we can purchase as a group and get a
>discount.
>
>The web site is here:  http://force-efi.com/cyber.htm and they're cyberdyne
>gauges.  Of course,  if anyone has a cheaper source,  or knows of better
>gauges for similar cost....
>
>Michael
>'78 Midget
>
>-----Original Message-----
>From: RKoeppel@aol.com [mailto:RKoeppel@aol.com]
>Sent: Friday, May 14, 1999 9:00 PM
>To: mgrazian@ltcm.com
>Subject: Re: Air Fuel Gauge
>
>
>In a message dated 5/14/99 1:26:00 PM Eastern Daylight Time,
>mgrazian@ltcm.com writes:
>
><< Can this gauge be used in my car,  and what hardware does it require?
>How
> much of it doesn't not come with the kit?  Can you tell me a little about
> how it works? >>
>
>You would need the gauge, sensor, and bung to weld into the exhaust. The
>total would be about $110. The sensor reads the remaining O2 in the exhaust
>and displays  an increasing scale from rich or lean on the gauge ,
>
>Rob
>Force EFI
>305-235-6160
>
>
>
>
><michael graziano wrote:>
>
>Hi,
>
>I'd like some information on the Air/Fuel gauge (CYB-7009).  I have a stock
>1978 normally aspriated MG Midget which uses a Zenith Stromberg single
>barrel carburator (CD140) on a 1500cc 4 cylinder engine.
>
>I'd like to fine tune and maintain it with a gauge similar to one you have
>for sale.
>
>Can this gauge be used in my car,  and what hardware does it require?  How
>much of it doesn't not come with the kit?  Can you tell me a little about
>how it works?
>
>If you need any other information about the car,  please email me either
>here, or at mgraziano1@hotmail.com.
>
>Thank you in advance.
>
>Michael
>
>  _____________________________________
> /                                     \
>|           Michael Graziano            |
>|   Long Term Capital Management L.P.   |
>|         Phone: 203-552-5706           |
>|         Fax:   203-553-5869           |
>|       Email: mgrazian@ltcm.com        |
> \_____________________________________/
>


<Prev in Thread] Current Thread [Next in Thread>