mgs
[Top] [All Lists]

Re: 'B Questions

To: Larry.Ruggiero@afrc.af.mil, mgs@autox.team.net
Subject: Re: 'B Questions
From: Ericsmgs@aol.com
Date: Tue, 27 Jul 1999 09:00:18 EDT
Larry,
Two quick and dirty methods for o/d ID.  First, look at the engine #. Example 
18v672Z is non-overdrive for 1973, while 18v673Z is for overdrive.  Second, 
the overdirve circuit is controlled by a yellow wire, the only yellow wire on 
the car.  Look for a cluster of wires on the passenger side fender well, just 
above the starter, and about 10" aft of the fuse box.  The overdrive wire is 
in this cluster and has a connector in it.  This is where the overdrive 
harness going to the transmission plugs in.  If you see the yellow wire 
hanging, with no harness connecting, there is no overdrive.  Obivously, if 
the wire does connect to the harness going to the transmission, the overdrive 
should be there, but there are no guarantees.  The only sure fire method is 
to look under the car.  Over the years, a lot of engines have been changed 
and a lot of gearboxes have been removed.  Good luck!

Eric Swanger
See many cars, so little time....

<Prev in Thread] Current Thread [Next in Thread>