mgs
[Top] [All Lists]

Re: Front end MGA problems

To: mgs@autox.team.net
Subject: Re: Front end MGA problems
From: Rocky Frisco <rock@rocky-frisco.com>
Date: Wed, 18 Aug 1999 19:01:53 -0500
Robert Cox wrote:
> 
> Dean Crowley wrote:
> >
> > The east west seem to be
> > a gap up in the inner ball joint.
> > I really don't want to take the boots off and mess with
> > the inner ball joint in the other end of the rack.
> 
> It may pay to remove the boot and have a look. I had a lot of play on on
> end of the rack on my MGA and assumed it was wear. I eventually took the
> boot off and found that the ball joint screws into the end of the rack
> and has some kind of lock flange hammered into indentations (something
> like that... it's 8 years since I did it). This flange had been bashed
> so many times it really wasn't locking anything and the ball joint had
> screwed loose. I put some loctite on the thread and hammered the locking
> flange as best I could. It's been fine the past 8 years.

Worth whatever trouble it takes to find out what's wrong; not good to
suddenly lose steering, possibly fatal.

-Rock
-- 
Rocky, JJ Cale Band & Pratchett Books: http://www.rocky-frisco.com
Rocky's Mini Cooper Page: http://www.geocities.com/MotorCity/6437/
Mini Books:  http://www.geocities.com/MotorCity/6437/rockboox.html

<Prev in Thread] Current Thread [Next in Thread>