Re: Need more advice on TD piston change

[Skye Poier <skye@ffwd.com>]

Word on the street is that BobMGT@aol.com said:
> Now that I've pulled the bad +.020 piston, how can I check the bore to make 
> sure the replacement needs to be +.020?

I'm no expert in this area, but perhaps you could check by putting a new
(oversize) ring in the cylinder and checking the end gap.

Skye

--
1966 MGB - GHN3L     Safety Fast!             __,__\__ 
The MGB Experience   http://www.mgb.bc.ca/   (_o____o_)