mgs
[Top] [All Lists]

Re: Bonnet Compatibility

To: Frank Krajewski <frankk@intap.net>
Subject: Re: Bonnet Compatibility
From: David Councill <dcouncil@imt.net>
Date: Wed, 29 Mar 2000 11:17:01 -0700
The bonnets should be completely compatible from 1964 to at least the early 
70s, from my own experience anyway. There may be some differences on the 
prop from early to later years perhaps but 67BGT to 64B should be the same.

David
67 BGT
71 BGT

At 12:40 PM 3/29/00 -0500, you wrote:
>Probably a dumb question so you can't accuse me of inconsistency. I want
>to swap the good aluminum bonnet/hood from my 1967 MGBGT parts car to my
>1964 MGB roadster since the PO installed a steel bonnet on the 1964. Are
>they compatible?  Will the 67 MGBGT bonnet fit my 64 B Roadster without
>any modifications? Just thought I would ask rather than remove both
>bonnets only to find they aren't exchangable. I assume if the  BGT
>bonnet fits the 64 roadster then the reverse is likewise no problem,
>i.e. the steel bonnet from the 64 will fit the 67 BGT.
>Frank "Swamp Yankee" Krajewski
>http://www.bmcne.com


<Prev in Thread] Current Thread [Next in Thread>