Twice is bad, you should've used a polyethelyne bag after the first ...
----- Original Message -----
From: James Nazarian Jr <James.Nazarian@Colorado.EDU>
To: Robert Sexson <rsexson@excite.com>
Cc: <mgs@autox.team.net>
Sent: Friday, April 07, 2000 9:54 PM
Subject: Re: Clutch master cyl.
> Yes, but my problems were mainly with the brake master. When rebuilding
> it the pistons have to be seperated and there is a little metal cup on a
> very heavy spring in the middle. I managed to launch the cup across my
> garage twice, and all told spent five or so hours looking for it.
>
> James Nazarian
> '71 B roadster
> '71 BGT rust free and burnt orange
> '63 Buick 215
>
> On Fri, 7 Apr 2000, Robert Sexson wrote:
>
> >
> > I removed the clutch master cyl. yesterday and disassembled. The rubber
cup
> > was folded up on the side of the spring. I installed new kit and
reinstalled
> > the cyl. in the B. Bleed the system and it seems to work fine. Has about
an
> > inch of slave travel and no leaks.
> >
> > Another question. Has anyone, other than me, cussed when removing and
> > reinstalling the DARN thing?
> >
> > R. Sexson
> > 74.5 B
> >
> >
> >
> >
> >
> > Get 100% FREE Internet Access powered by Excite
> > Visit http://freelane.excite.com/freeisp
> >
>
|