bondo on bonnet

[Brian Warmuth <warmuthb@vms.wlsc.wvnet.edu>]

Charles:

If you prep the area right (sand/grind 80 grit), use good bondo, (I
recommend "Fiberstrand" or "Metal" as brandnames), good hardner, prime
and paint the entire hood, and seal the repair from underneath, you
should not have any problems due to flexing.  If the panel were flexing
that much, you'd be having other problems! Probably more of a concern is
heat....but again, I really don't believe you should have any problems.

Brian
52 TD
59 MGA
58 ZB
60 Farina Magnette