mgs
[Top] [All Lists]

Re: Seat R&R on 72 B

To: djw69@idt.net
Subject: Re: Seat R&R on 72 B
From: Bob Howard <mgbob@juno.com>
Date: Sun, 3 Sep 2000 06:51:33 -0400
  Some time ago, another lister suggested this:
    To reinstall the seats, insert the two front bolts upward through the
floor. Hook the seat tracks onto them, then run the rear bolts down as
normal.  Then, remove the front bolts and reinsert as normal.   
  This makes it fairly easy to locate the tracks before trying to secure
them.  It has worked well for me in my '72 GT.
Bob


On Fri, 1 Sep 2000 13:43:44 -0700 "Dave Wood" <djw69@idt.net> writes:
> Question of those who BTDT.  I just put in a new emergency brake 
> cable and
> had to remove the passenger seat to unbolt the cable.  Replacing the 
> cable
> was nothing compared to getting the seat back in place.  I managed, 
> but I
> hope there might be a better way as I intend to recover my seats one 
> of
> these days.  I removed the four bolts holding the rails to the floor 
> board
> to remove the seat.
> 
> Thanks for any advise for the future.
> 
> Dave 72 B
> 
> 
> 

<Prev in Thread] Current Thread [Next in Thread>