mgs
[Top] [All Lists]

Re: Adding over drive

To: mgs@autox.team.net
Subject: Re: Adding over drive
From: WSpohn4@aol.com
Date: Fri, 13 Oct 2000 18:38:46 EDT
In a message dated 13/10/00 2:15:43 PM Pacific Daylight Time, 
owner-mgs-digest@autox.team.net writes:

> I also heard once that the O/D uses a different drive shaft

The early non-synch trans has a different main shaft, and the overall 
transmission length is 1 1/8" shorter. In the factory installation this is 
taken into account by using a longer driveshaft. If you are retrofitting, you 
can also make up a spacer between the diff and rear driveshaft yoke (as long 
as you do  it properly!).

Bill

<Prev in Thread] Current Thread [Next in Thread>