Mark, as you may have read in my threads I am also looking into this.
However, I have installed the spax front and rear shocks so that my have to
do with my cars front right wheel being slightly off.
As far as caster, camber and toe in I hope this helps
Camber is the vertical alignment of the wheel in reference to a vertical
line that passes through the center of the wheel. If you look at your car
from the front the wheels can look like a letter A positive camber, like a
V negative camber, H zero camber.
Caster is a horizontal measure. The wheel can be to far front or to far
back with respect to the rear axle or a set point. HTH, Enrique
|