Duplicolor.
Larry Hoy
>-----Original Message-----
>From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
>Behalf Of Andrew B. Lundgren
>Sent: Friday, November 03, 2000 7:18 PM
>To: Larry Hoy; mgs@autox.team.net; Steve Shoyer
>Subject: RE: Peco exhaust paint
>
>
>Do you have a brand that you have used? The ones I have tried have
>cooked off almost right away...
>
>On Thu, 02 Nov 2000 23:09:01 -0700, Larry Hoy wrote:
>
>>Your local auto parts store will have high temp exhaust manifold paint
>(1200'F). That will work
>>just fine.
>>
>>Larry Hoy
>>
>>>-----Original Message-----
>>>From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
>>>Behalf Of Steve Shoyer
>>>Sent: Thursday, November 02, 2000 9:57 PM
>>>To: 'mgs@autox.team.net'
>>>Subject: Peco exhaust paint
>>>
>>>
>>>I ordered a Peco exhaust system to replace the rusted one on my 1980 MGB.
>>>The header arrived, but the muffler and pipes fell out of the box during
>>>shipping. The header is a bit scratched up, so while I'm waiting for the
>>>other parts, I wanted to get opinions on the best paint to use to cover the
>>>scratches so it won't rust. I didn't see anything on the Eastwood web site
>>>in red for high temps. I guess I could paint it black...
>>>
>>>--Steve
>>
>>
>
>--
>Andrew Lundgren
>lundgren@byu.net
>http://www.itwest.net/~lundgren
|