mgs
[Top] [All Lists]

Re: "On the road again ..."

To: "DuhCaddyhm" <wadleigh@syix.com>, "MGs" <mgs@autox.team.net>
Subject: Re: "On the road again ..."
From: "Andrew B. Lundgren" <lundgren@byu.net>
Date: Thu, 28 Dec 2000 16:34:09 -0700 (MST)
I think that "BB" might be part of the float assembly.  You may want to
check into that...

On Mon, 06 Nov 2000 21:14:01 -0800, DuhCaddyhm wrote:

>Hi everyone!
>
>THANKS for all the help and suggestions on getting my Midget started.
>Most of it I'd already tried, but with a combination of things ..... I
>got it running and drove it around today for a while!!!  First run in
>three months!
>
>The timing is out 180, but when I had switched wires before, nothing
>happened.  This weekend I rebuilt both carbs ..... 1/4 inch of garbage
>in the float bowls and a general mess all over.  Even found a small
>bearing (like a little BB) in one of the float bowls!  Put the carbs
>back on this morning, adjusted them, and still wouldn't start.  Tried
>switching the plug wires again .... and wah lah ... started right up!
>So, between that and the carbs, it's going!  At least I did manage to
>get all the little stuff done that I'd been putting off.  Next is the
>paint job!
>
>Again, thanks!
>
>Sue
>'74 Midget
>'65 Midget
>'65 MG-1100
>

--
Andrew Lundgren
lundgren@byu.net
http://www.itwest.net/~lundgren

<Prev in Thread] Current Thread [Next in Thread>
  • Re: "On the road again ...", Andrew B. Lundgren <=