Hi All,
When I replacede the rubber bushings in the sway bar ends with the poly
bushings I just cut the polys in half then inserted each half into the
sway bar boss. I tried heating the bushing and pressing it in but the
flanges were just too big in diameter.
On Mon, 29 Jan 2001 18:43:58 -0500 "Dan Hackney" <danhackney@nc.rr.com>
writes:
> Chris-
> The large lip is actually part of the bushing. I didn't realize
> this until
> my new ones came from Moss. I initially pressed the rubber part out
<snip>
> -Dan
> '72 MGB
Steve Bettencourt
http://www.bmcne.com
webmaster@bmcne.com
|