Re: Mig Welding tips and tricks

[Bullwinkle <yd3@nvc.net>]

Phil:

Change your gas to 75% Argon and 25% C02.  I tried the 100% CO2
and it just doesn't work well on RUSTY metal.  Straight CO2 is
fine for new CLEAN metal but not RUSTY metal.  100% Argon would
be better, but I opted for the mix as it's a little cheaper.

Blake

///
///  mgs@autox.team.net mailing list
///  (If they are dupes, this trailer may also catch them.)