mgs
[Top] [All Lists]

Re: Replacing a lost car number plate

To: kpdii@softhome.net
Subject: Re: Replacing a lost car number plate
From: Aeseeyou@aol.com
Date: Fri, 28 Dec 2001 19:44:16 EST
Alvin,
I made a quick review of where VIN numbers are placed according to "Original 
MGB" With MGC and MGB GT V8 by Ditlev Clausager (Bay View Books/1994) And the 
year 1967 was divided into early and late 1967. Early '67 Mk. I MGB shows 1 
(one) VIN plate and it's a rectangular plate mounted standing vertically with 
the MG logo at the top end. It appears to run parallel with the inner wing 
valance radiator support.The  Late '67 Mk.II MGB's show 2 (two) plates that 
are rectangular but with rounded ends, these were mounted horizontally (long 
ways) just below where the fender (wing) is bolted to the inner wing. Anyway 
its on page 121 (The identification section starts at page 118.)  I hope this 
hasn't thoroughly confused you. Albert Escalante 1978 MGB

///
///  mgs@autox.team.net mailing list
///  or try http://www.team.net/cgi-bin/majorcool
///


<Prev in Thread] Current Thread [Next in Thread>