At 01:40 PM 5/20/02 -0700, Skye Poier wrote:
>Pretty easy to tell if its a hydraulic problem, just watch the arm coming
>out of the clutch slave while someone pushes the pedal. I believe it
>should move 1-1.5 inches
The MGA clutch slave moves 1/2" with full pedal stroke. With the
mechanical ratio of the lever arm the release bearing moves about 3/4"
Barney Gaylord
1958 MGA with an attitude
http://www.ntsource.com/~barneymg
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|