mgs
[Top] [All Lists]

Re: vibration in front end

To: "James Nazarian" <jhn3@uakron.edu>, "mgs" <mgs@autox.team.net>
Subject: Re: vibration in front end
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Mon, 29 Sep 2003 13:49:32 +0100
Bearings can be checked by grasping the top and bottom of the tyre (wheel
raised) and rocking the top in and the bottom out and vice-versa, there
should be perceptible play, but that can also reveal wear in the king-pin
and A-arm connections, someone else needs to get underneath to see what is
moving in relation to what.  Clonks going from lock to lock IME have been
caused by loose/ovalled A-arm to stub axle connections.  Again IME worn
bearing have made themselves known by squeaking, any looseness would surely
result in the wheel taking up a fixed camber, and imbalance in the wheels or
tyres would be causing the wobble, but I never noticed the effect of
applying the brakes when I had my out of balance tyres.  Worn (loose)
track-rod ends could also cause a similar problem.

PaulH.

----- Original Message -----
From: "James Nazarian" <jhn3@uakron.edu>
To: "mgs" <mgs@autox.team.net>
Sent: Sunday, September 28, 2003 4:35 PM
Subject: vibration in front end


> Above roughly 65mph I get a shimmy in the front end.




<Prev in Thread] Current Thread [Next in Thread>