And while you are at it insert an in-line fuse between the main and gearbox
looms, a standard 17 amp rated 35 amp blow is fine. And while you are at
*that* insert another one where the rear loom joins the white (or
white/brown) in the main loom. Neither are factory fused and both have been
known to cause loom fires.
PaulH.
----- Original Message -----
From: "Dodd, Kelvin" <doddk@mossmotors.com>
To: <mgs@autox.team.net>
Cc: <Philip.McConnell@thewhistlestop.org>
Sent: Friday, April 09, 2004 6:29 PM
Subject: RE: Forwarded: Re: V1 #1547]
...If you look at the main harness side, you will see a yellow wire which is
terminated in a bullet sleeve. This is the OD feed wire from the wiper
switch. Moss does carry an OD gearbox wiring subharness for the 68-76 car,
which plugs into this connector ...
|