Make sure there's nothing near the fans, then disconnect the leads going
to the sensor at the top of the radiator and touch them together. This
should complete the circuit to power the fans. The sensor is basically
a switch.
--Steve Shoyer (1980 MGB)
-----Original Message-----
From: DMatt21502@aol.com [mailto:DMatt21502@aol.com]
Sent: Tuesday, January 11, 2005 8:30 PM
To: mgs@Autox.Team.Net
Subject: Electrical Problem
... Is there any way to check the operation of the fans without having
the engine at operating temperature so the fans will start...
|