mgs
[Top] [All Lists]

Re: Thermostat housing/water outlet

To: "Zach Dorsch" <herr_dorsch@yahoo.com>, "MG LIST"
Subject: Re: Thermostat housing/water outlet
From: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>
Date: Sat, 26 Feb 2005 10:35:09 -0000
North American spec and 'Euro' spec cars radiators inlet (?) changed sides
at the same time, for the 77 model year.  The Eurospec elbow should be a
direct replacement for the one with the air pump bracket as long as it is
used on the same era of engine.  I presume it *is* the elbow you are looking
for and not a bracket as you state.  You would probably be better off at an
MG parts specialist than a breakers, there are many that deal in 2nd hand
parts and dismantle cars where the bodies are too far gone.  Whereabouts in
England are you?

PaulH.

----- Original Message -----
From: "Zach Dorsch" <herr_dorsch@yahoo.com>
To: "MG LIST" <mgs@autox.team.net>
Sent: Saturday, February 26, 2005 10:05 AM
Subject: Thermostat housing/water outlet


...  I noticed that the second p/n states that it is for a Euro-spec
car--does this mean that its the same water outlet minus the bracket for the
air pump?  More importantly is the outlet designed for a radiator that has
the outlet on the driver's side (LHD)?  I am in England right now
(university) so I assume that it would not be that difficult to source one
of these brackets here from a breaker.




<Prev in Thread] Current Thread [Next in Thread>