Sounds like when it is working off the pedal it is likely to give a very
fierce engagement.
----- Original Message -----
> My bushings on the pedals are fine. There is no free play. The master
> cylinder push rod goes all the way into the cylinder. I find it hard
> to believe that there is so little leeway in the system but when I hit
> that magical 1/2" that my slave won't quite hit, then the engine is
> disengaged and I can run the shifter through the all the gears without
> trouble. I drop it down to 7/16" and the engine won't disengage and I
> take off.
|