Many thanks!
-----Original Message-----
From: Councill, David <dcouncill@msubillings.edu>
To: timfboston@aol.com; mgs@autox.team.net
Sent: Sat, 14 May 2005 21:05:39 -0600
Subject: RE: Exhaust Gasket
Another popular list question. And this answer, which I saved because I ask
myself this question everytime I change them, comes from a list email a few
years ago and gives credit to John Twist:
"The good gaskets are supplied with the silver,
metal side and an asbestos side. The SILVER
side is fitted DOWN so that the more flexible
ASBESTOS is fitted UP against the manifold. I
usually coat the metal band of the gasket, as
well as the corresponding section of the exhaust
pipe with nickle anti-seize so that it is easily
removed next time..."
David Councill
67 BGT
72 B
________________________________
From: owner-mgs@autox.team.net on behalf of timfboston@aol.com
Sent: Sat 5/14/2005 8:04 PM
To: mgs@autox.team.net
Subject: Exhaust Gasket
Which end is up for the gaskets between the exhaust pipes and the exhaust
manifold? The metal side or the sooty material side?
Thanks
Tim
1971 MGB
|