Re: Fuel Sending unit calibration

["Paul Hunt" <paul.hunt1@blueyonder.co.uk>]

Ah, I get you.  I thought it was the rubber tank seal that had that problem
... or maybe they both did.

Cheers,
Paul.

----- Original Message ----- 
From: "Dodd, Kelvin" <doddk@mossmotors.com>
To: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>; "oliver"
<sumton@sbcglobal.net>; <mgs@autox.team.net>
Sent: Tuesday, September 13, 2005 7:16 PM
Subject: RE: Fuel Sending unit calibration


Paul:

This is the seal in the center of the sending unit mounting plate that
the electrical connector goes through, not the mounting plate to tank
seal.