mgs
[Top] [All Lists]

Re: replacing water pump question

To: Chad Cooper <mgb72@airmail.net>
Subject: Re: replacing water pump question
From: Chad Cooper <mgb72@airmail.net>
Date: Sun, 14 May 2006 14:42:56 -0500
I meant centering post.

Chad Cooper wrote:

> Dave,
> Have you removed the 4 bolts?  If so, then  that is all that holds it 
> on other than some possible rust on the cetering post.  You can tap it 
> loose with a rubber mallet or dead blow hammer , it shouldn't take much.
> Chad
> '72 B
> Dave Willner wrote:
>
>> I'm in the middle of replacing my water pump and have most everything 
>> off,
>> the radiator, the fan, alternator, etc.  I'm scratching my head 
>> trying to
>> remove the pully. Dos this typically require an excessive amount of 
>> prying
>> or persuading to remove. The exploded views in Haynes shows a hub the 
>> four
>> fan bolts tap into, seems to be kind of tucked inside the pulley. Any 
>> BTDTs
>> or insight. Appreciate the help
>>
>> Dave Willner
>> Stroudsburg, PA
>> 59 TR3A 70 MGB
>> 70 BSA 441 Victor Special




<Prev in Thread] Current Thread [Next in Thread>