Barney,
Your description of the assembly clears things up significantly.
Thanks as always for the advice.
-Dan
On 12/19/06, Barney Gaylord <barneymg@mgaguru.com> wrote:
<snip>
> It is a bit of a pain to R&R the pedals, but the bushings are
> otherwise fairly cheap and easy to replace. I spent an extra half
> hour once measuring things and adjusting the length of the steel
> bearing tube to minimize clearance for the thrust washers. This was
> time well spent, as I haven't felt the need to change the bushings
> again in a very long time.
>
> Barney Gaylord
> 1958 MGA with an attitude
> http://MGAguru.com
|